Products – Flow Meters – Vortex Flow Meters
We provide quality products from international reliable partners and offer after sales services as well. Kindly send enquiry using enquiry form or by Email.
Liquid Vortex Flow Meter –
RNL and RWL Series – Vortex Flow Meter for Liquids
Insertion and Wafer type vortex flow meters are suitable for different types of liquids such as Boiler feed water and condensate, Cooling tower Pool and water park, Chemical processing, Municipal water treatment, Ground water monitoring and Irrigation systems
Main Features:
-
Pipe sizes 4″ (102 mm) and higher
-
Very low pressure drop
-
Easy installation
-
Suitable for very low and very high temperature applications
General Specifications:
-
Accuracy: ±2% of reading
-
Pressure Rating: -5 to 250 PSIG (-0.3 to 17 BARg)
-
Repeatability: 0.5% of reading
-
Process Temperature: Maximum 300 °F (148 °C)
-
Enclosure:NEMA 4X (IP66) polycarbonate
-
Housing: 6061-T6 aluminum or 303 stainless steel
Download Brochures
Technical Datasheet User Manual
Gas Vortex Flow Meter –
RWG/RWS and RNG/RNS Series – Vortex Flow Meter for Liquids
Insertion and Wafer type vortex flow meters are suitable for different types of gases such as Combustion air, Compressed air, Incineration gas, Natural gas, Nitrogen Digester gas (BioGas: CH4 + CO2) and Chemical processing
Main Features:
-
HART communication protocol
-
Very low pressure drop
-
NIST traceable calibration
-
Suitable for very low and very high temperature applications
General Specifications:
-
Accuracy: ±1% of reading
-
Pressure Rating: -5 to 250 PSIG (-0.3 to 17 BARg)
-
Repeatability: 0.5% of reading
-
Process Temperature: -20 °F to 360 °F (-28 °C to 182 °C)
-
Construction: Stainless steel wetted parts with ceramic transducers (Te on® in RWBG Series), Viton® o-rings, NEMA 7 XP enclosure standard
-
Communications: HART® Protocol (via PC with HART Modem)
Download Brochures
Technical Datasheet Wafer Type Technical Datasheet Insertion Type User Manual
Steam Vortex Flow Meter –
RWG/RWS and RNG/RNS Series – Vortex Flow Meter for Liquids
Insertion and Wafer type vortex flow meters are suitable for steam such as in Non-condensing steam, Process steam (saturated), Energy and boiler monitoring and Building and facilities management
Main Features:
-
HART communication protocol
-
Pipe sizes from 6″ to 72″ (152 to 1829 mm)
-
35:1 turndown ratio
-
Compensation for mass fl ow measurement
General Specifications:
-
Accuracy: ±1% of reading
-
Pressure Rating: -5 to 250 PSIG (-0.3 to 17 BARg)
-
Repeatability: 0.5% of reading
-
Process Temperature: -20 °F to 360 °F (-28 °C to 182 °C)
-
Construction: Stainless steel wetted parts with ceramic transducers (Te on® in RWBG Series), Viton® o-rings, NEMA 7 XP enclosure standard
-
Communications: HART® Protocol (via PC with HART Modem)
Download Brochures
Technical Datasheet Wafer Type Technical Datasheet Insertion Type
Comments are closed.